Almatec
AHD25
This series of diaphragm pumps is made for real heavy-duty work: chemical waste, tough/liquid sediment, that's where the 5 pumps in this series are at their best. Not surprisingly, with their capacities of 70 - 200 lpm, particle sizes of 4 - 12 mm, air and liquid connections of 19 - 32 mm respectively and their viscosity of 5000 - 10000 mPa.s.
Extremely robust
Specially for high pressure
The AHD/AHS pumps descend from the earlier AH series. The pumps are the ultimate solution for your high-pressure applications up to 15 bar. The AHD series is equipped with a pressure booster that doubles the inlet pressure (max. 7 bar) to 15 bar. The AHS series does without a pressure booster. With these, the outlet pressure results in the same as the inlet pressure (max 15 bar).Features
- 1″ pump
- Housing in Polyethylene
- Extremely robust
- Safe and durable
Downloads
Max. capacity | 167 lpm |
Max. compressed air pressure | 7 bar |
Max. temperature | 70° C |
Max. particle size | 5 mm |
Air connection | 13 mm (1/2″) |
Fluid connections | 25 mm (1″) |
Material | EPDM |
Material | NBR |
Material | PTFE/EPDM compound |
Pressure to perform
Also check out these other
Almatec pumps
There is a lot to gain and save by using the right pump.
We are happy to advise you!
Service is paramount
Advice from the Pompologist
The Netherlands' only pumpologist, Gerrit Klaassen, regularly provides tips via LinkedIn on how to keep pumping trouble-free. All videos can be seen back on his video channel.
Pressure to perform
Discover if an Almatec pump is right for your business?
There is a lot to gain and save by using the right pump.
We are happy to advise you!